Monday

Take Note!
You will loose your lab privileges for the remainder of the hour, and will have to make up time after school, if you do not follow the following rules:
-no more than 2 students by the pickle at any time.
-safety glass must be worn while sawing, soldering and working with the pickle.  
-long hair must be tied back (not tucked back) around any machine with moving parts and around the flames.

Sample Fabrication:
1. Saw your metal in half with a zig zag line.

2. Draw a shape on one of the halves.  Tap a dimple towards the inside of the line.  Drill a whole in the dimple.  Saw out the shape.

3. File the zig zag edges.  Make one pointed and make the other curved.  File the negative shape using flat files for the straight edges and round files for the curved edges.

4.  Anneal your metal to prepare it for further work hardening.4.  Anneal your metal to prepare it for further work hardening.

5. Apply a rolled texture to the half without the negative space shape.

6. Apply a stamped texture to the half with the negative space shape.

7. Pickling

8. Soldering

Demo
-Adding a bail.
-finishing steps